Reference Manual for the 54 Mbps Wireless ADSL Firewall Router DG834G

•RIP Version

This controls the format and the broadcasting method of the RIP packets that the router sends. It recognizes both formats when receiving. By default, this is set for RIP-1.

—RIP-1 is universally supported. RIP-1 is probably adequate for most networks, unless you have an unusual network setup.

—RIP-2 carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2 format.

—RIP-2B uses subnet broadcasting.

—RIP-2M uses multicasting.

Note: If you change the LAN IP address of the router while connected through the browser, you will be disconnected. You must then open a new connection to the new IP address and log in again.

DHCP

By default, the router will function as a DHCP (Dynamic Host Configuration Protocol) server, allowing it to assign IP, DNS server, and default gateway addresses to all computers connected to the router's LAN. The assigned default gateway address is the LAN address of the router. IP addresses will be assigned to the attached computers from a pool of addresses specified in this menu. Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN.

For most applications, the default DHCP and TCP/IP settings of the router are satisfactory. See “IP Configuration by DHCP” on page B-10for an explanation of DHCP and information about how to assign IP addresses for your network.

Use Router as DHCP server

If another device on your network will be the DHCP server, or if you will manually configure the network settings of all of your computers, clear the ‘Use router as DHCP server’ check box. Otherwise, leave it selected.

Specify the pool of IP addresses to be assigned by setting the Starting IP Address and Ending IP Address. These addresses should be part of the same IP address subnet as the router’s LAN IP address. Using the default addressing scheme, you should define a range between 192.168.0.2 and 192.168.0.254, although you may want to save part of the range for devices with fixed addresses.

The router will deliver the following parameters to any LAN device that requests DHCP:

Advanced Configuration

7-5

202-10006-01

Page 92 Page 94
Page 93
Image 93
NETGEAR DG834G manual Use Router as Dhcp server
Page 92 Page 94

DG834G specifications

The NETGEAR DG834G is a versatile and reliable wireless ADSL modem/router that has gained popularity among both home and small office users. Designed to offer high-speed internet connectivity and robust network capabilities, the DG834G provides an ideal solution for users looking for both performance and convenience.

One of the standout features of the DG834G is its ADSL2/2+ compatibility, supporting download speeds of up to 24 Mbps and upload speeds of up to 1 Mbps. This makes it well-suited for activities such as streaming high-definition video, online gaming, and video conferencing. The device also ensures a reliable connection, thanks to its built-in Quality of Service (QoS) capabilities, which prioritize bandwidth allocation for critical applications.

The DG834G incorporates 802.11g wireless technology, offering wireless data transfer rates of up to 54 Mbps. This allows users to connect multiple devices to the network without experiencing significant drops in speed. Additionally, the router features a range of up to 150 feet indoors and 300 feet outdoors, ensuring robust coverage for most home and small office environments.

Security is a key focus in the design of the DG834G. The router supports Wi-Fi Protected Access (WPA) and Wired Equivalent Privacy (WEP) encryption protocols, helping to safeguard the network from unauthorized access. Users can also take advantage of the device’s firewall features, such as Stateful Packet Inspection (SPI), to protect against potential online threats.

Installation and setup of the DG834G are user-friendly, featuring a web-based interface that simplifies the configuration process. This allows users to easily manage their network settings, configure parental controls, and set up guest access for visitors without compromising the primary network.

The DG834G also includes four Ethernet ports, enabling wired connections for devices that require a stable and high-speed connection, such as gaming consoles or desktop computers. This flexibility in connectivity options enhances the device’s utility for diverse networking needs.

Overall, the NETGEAR DG834G is a powerful and reliable ADSL modem/router that combines advanced features, robust security, and ease of use. Its combination of high-speed internet support and versatile connectivity options makes it an excellent choice for users looking to enhance their home or small office network.
Top Page Image Contents