Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual
Advanced Configuration 5-5
v1.0, July 2008
Under Advanced in the main menu, select LAN IP Setup.
The LAN TCP/IP Setup settings are:
•IP Address. This is the LAN IP address of the modem router.
•IP Subnet Mask. This is the LAN subnet mask of the modem router. Combined with the IP
address, the IP subnet mask allows a device to know which other addresses are local to it, and
which must be reached through a gateway or modem router.
•RIP Direction. Router Information Protocol (RIP) allows a modem router to exchange routing
information with other routers. The RIP Direction selection controls how the modem router
sends and receives RIP packets. Both is the default setting.
– When set to Both or Out Only, the modem router broadcasts its routing table periodically.
– When set to Both or In Only, the modem router incorporates the RIP information that it
receives.
– When set to None, the modem router does not send any RIP packets and ignores any RIP
packets received.
Figure 5-2