Click OK to proceed.

If you still cannot connect to the FVS318v3, verify your computer networking setup. Your computer should be set to obtain both IP and DNS server addresses automatically, which is usually so. For help with this, please see the Reference Manual or animated tutorials on the Resource CD.

2.Follow the Smart Wizard prompts to connect to the Internet.

3.Click Done on the Success screen and be sure to click OK at the prompt to close the screen and finish.

Note: The configuration assistant only appears when the FVS318v3 is in its factory default state. After you configure the FVS318v3, it will not appear again. You can always connect to the router configuration menu to change its settings. To do so, open a browser and go to http://www.routerlogin.net. Then, when prompted, enter admin as the user name and password for the password both in lower case letters.

January 2005

Troubleshooting Tips

Here are some tips for correcting common problems you may encounter.

Be sure to restart your network in this sequence:

1.Turn off and unplug the modem, turn off the FVS318v3, and shut down the computer.

2.Plug in and turn on the modem, wait two minutes.

3.Turn on the FVS318v3 and wait one minute.

4.Turn on the computer.

Make sure the Ethernet cables are securely plugged in.

•The INTERNET LINK light on the FVS318v3 will be lit if the Ethernet cable to the FVS318v3 from the modem is plugged in securely and the modem and FVS318v3 are turned on.

•For each powered on computer connected to the FVS318v3 with a securely plugged in Ethernet cable, the corresponding FVS318v3 LOCAL port LINK light will be lit. The front and back of the FVS318v3 identifies the number of each LOCAL port.

Make sure the network settings of the computer are correct.

•Ethernet cable and wirelessly connected computers should be configured to obtain IP and DNS addresses automatically via DHCP whenever possible. For help with this, please see the animated tutorials or the Reference Manual Appendix C on the Resource CD.

•Some cable modem ISPs require you to use the MAC address of the computer regis- tered on the account. If so, in the Router MAC Address section of the Basic Settings menu, select, “Use this Computer’s MAC Address.” The firewall will then capture and use the MAC address of the computer that you are now using. You must be using the computer that is registered with the ISP. Click Apply to save your settings. Restart the network in the correct sequence.

Use the FVS318v3 status lights to verify correct operation.

If the FVS318v3 Power light does not turn solid green within two minutes of turning the firewall on, or if the Test light does not go off, reset the firewall as described in the Reference Manual on the Resource CD.

Advanced User Wizard Bypass

Technically advanced users who want to bypass the Smart Wizard configuration assistant can do so by logging on to the firewall at http://www.routerlogin.net/basicsetting.htm with the user name of admin and the password of password, both in lower case letters.

Technical Support

Thank you for selecting NETGEAR products.

After completing the Smart Wizard configuration assistant, locate the serial number on the bottom label of your product and use it to register your product at http://www.NETGEAR.com/register.

Registration on the web site or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product.

Go to http://kbserver.netgear.com for product updates and Web support.

©2005 by NETGEAR, Inc. All rights reserved.

NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries.

Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.

Page 1 Page 2
Page 2
Image 2
NETGEAR FVS318v3 manual Troubleshooting Tips, Advanced User Wizard Bypass Technical Support
Page 1 Page 2

FVS318v3 specifications

The NETGEAR FVS318v3 is a powerful dual WAN gigabit VPN firewall designed to provide robust security and reliable connectivity for small to medium-sized businesses. It offers an array of features and technologies that make it an outstanding choice for organizations requiring secure network access and improved bandwidth management.

One of the standout features of the FVS318v3 is its dual WAN capability. This allows users to connect two separate internet connections, which enhances redundancy and ensures continuous network availability. In the event that one WAN connection fails, the device automatically switches to the backup connection, minimizing downtime and maintaining productivity.

The firewall offers advanced security features, including a stateful packet inspection (SPI) firewall and NAT (Network Address Translation), which helps protect the network from unauthorized access and external threats. Additionally, the FVS318v3 supports IPsec and SSL VPN protocols, providing secure remote access for employees working from home or on the go. With support for up to 15 SSL VPN clients and 20 IPsec VPN tunnels, it is suitable for businesses that require flexible and secure remote connectivity.

In terms of performance, the FVS318v3 boasts a high-speed gigabit throughput, ensuring fast data transmission and minimal latency. This is particularly important for businesses that rely on cloud-based applications, video conferencing, and other bandwidth-intensive activities. Furthermore, the device is equipped with advanced QoS (Quality of Service) features that allow administrators to prioritize traffic, ensuring that critical applications receive the bandwidth they need during peak usage times.

Another noteworthy characteristic of the NETGEAR FVS318v3 is its user-friendly interface, which simplifies network management and configuration. Administrators can easily set up policies, monitor traffic, and manage connected devices through an intuitive web-based interface. It also offers support for 802.1Q VLAN tagging, allowing for network segmentation and improved security management.

In conclusion, the NETGEAR FVS318v3 is a versatile and feature-rich solution that delivers exceptional security and reliability for businesses. Its dual WAN functionality, advanced VPN capabilities, high-speed performance, and ease of use make it an excellent choice for organizations looking to safeguard their networks while ensuring seamless connectivity for employees.
Top Page Image Contents