Troubleshooting |
|
The Power light is not lit |
|
The switch has no power. | Power |
•Make sure the power cord is properly connected to the switch.
•Make sure the power adapter is properly connected to a functioning power outlet. If it’s in a power strip, make sure the power strip is turned on. If the socket is controlled by a light switch, make sure the switch is in the on position.
•Make sure you are using the NETGEAR power adapter supplied with your switch.
The Port number light is not lit for a connected device or stays on continuously
There’s a hardware connection problem.
•Make sure the cable connectors are securely plugged in at the switch and the device.
•Make sure the connected device is turned on.
•If the Ethernet cable is connected to a NIC or other Ethernet adapter, make sure the card or adapter is installed correctly and is working.
•Make sure the cable is less than 328 feet (100 meters).
Technical Specifications
Standards Compatibility: | ISO/IEC 802.3i (ANSI/IEEE 802.3i) |
| IEEE 802.3u |
| IEEE 802.3x Flow Control; compatible with Windows®, Mac® OS, |
| NetWare®, Linux® |
Network Interface: | |
Power: | 14.4 W max and 12V@1.2A DC input |
Physical Dimensions: | W: 158 mm (6.22") D: 105 mm (4.13") H: 25mm (0.98") |
Weight: | 0.49 kg (1.0829 lbs) |
Operating Temperature: | 0 to 40° C (32 to 104° F) |
Operating Humidity: | 10% t0 90% relative humidity, noncondensing |
Electromagnetic Compliance: | CE mark, Commercial; FCC Part 15, Class A; EN 55 022 (CISPR 22), |
Safety Agency Approvals for |
|
the Power Adapter: | CE mark, Commercial UL listed (UL 1950), TUV licensed (EN 60950), |
Performance Specifications
Frame Filter Rate:14,800 frames/sec max for 10M port / 148,800 frames/sec max for 100M port/1,488,000 frames/sec for 1000M port
14,800 frames/sec max for 10M port / 148,800 frames/sec max for 100M port / 1,488,000 frames/sec max for 1000M port
100 Mbps to 100 Mbps: 20 µs max
1000 Mbps to 1000 Mbps: 10 µs max
8000 MAC addresses
12 kilobytes per port
