NETGEAR GS108T-200NAS manual LED Designations, Port LEDs, Power Connector

GS108T Hardware Installation Guide

Figure 2-2illustrates the NETGEAR GS108T Smart Switch back panel:

Power Connector

Figure 2-2

The back panel contains a DC input for the supplied 12V/1A external power adapter.

LED Designations

Port LEDs

The following table describes the port LED designations.

Table 2-1. Port LEDs

LED	Designation
100 Mbps Link/ACT (Left LED)	• Off - No 100 Mbps link is established on the port.
	• Solid Green - A valid 100 Mbps link is established on the port.
	• Flashing Green - Packet transmission or reception is occurring on
	the port at 100 Mbps.
10 Mbps Link/ACT (Right LED)	• Off - No 10 Mbps link is established on the port.
	• Solid Green - A valid 10 Mbps link is established on the port.
	• Flashing Green - Packet transmission or reception is occurring on
	the port at 10 Mbps.
1000 Mbps Link/ACT (Both LEDs)	• Off - No 1000 Mbps link is established on the port.
	• Solid Green - A valid 1000 Mbps link is established on the port.
	• Flashing Green - Packet transmission or reception is occurring on
	the port at 1000 Mbps.

2-2 Physical Description

v1.0, January 2010