NETGEAR GS510TP-100NAS

Note: When the device powers up, there is a default IP

address already configured on the device. The

default IP address is 192.168.0.239 and subnet

mask 255.255.255.0.

Installation

NETGEAR GS510TP Smart Switch

Contents

Main Page Contents Page Conventions, Formats, and Scope How to Print this Manual Overview Features PoE Features Green Features Package Contents Page GS510TP Front-Panel Configuration GS510TP Back-Panel Configuration Physical Description 13 NETGEAR GS510TP Smart Switch LED Designations Port LEDs Each SFP port has its own indication LED. Table 1 describes the RJ-45 and SFP port LED designations. There are two LEDs for each RJ-45 port. Table 1. Port LEDs Device Hardware Interfaces RJ-45 Ports Reset Button Factory Defaults Button Page Desktop Switching Page Step 1: Preparing the Site Step 2: Installing the Switch Installing the Switch on a Flat Surface Rack Mounting the Switch Step 3: Checking the Installation Step 4: Connecting Devices to the Switch Step 5: Applying AC Power Step 6: Managing the Switch using a Web Browser or the PC Utility Page Page A Troubleshooting Chart Additional Troubleshooting Suggestions Network Adapter Cards Configuration Switch Integrity Auto-Negotiation Network Protocol and Standards Compatibility Management Page Electromagnetic Emissions Safety Page Index Numerics A B C R S T U V