NETGEAR GS510TP-100NAS Package Contents

Introduction

NETGEAR GS510TP Smart Switch

• PoE is enabled by default.

The GS510TP Smart Switch supports the following power-saving features:

• The power consumption automatically adjusts based on the RJ-45 cable length.

• Each port is configured to power down automatically when the port link is down.

Package Contents

Figure 1 shows the package contents of the NETGEAR GS510TP Smart Switch.

Figure 1. Package Contents

Verify that the package contains the following:

• NETGEAR GS510TP Smart Switch

• Rubber footpads for tabletop installation

• Rack mount kit

• AC power cord

• Installation guide

• Smart Switch Resource CD with the Netgear Smart Control Center and User’s manual

If any item is missing or damaged, contact the place of purchase immediately.

Contents

Main Page Contents Page Conventions, Formats, and Scope How to Print this Manual Overview Features PoE Features Green Features Package Contents Page GS510TP Front-Panel Configuration GS510TP Back-Panel Configuration Physical Description 13 NETGEAR GS510TP Smart Switch LED Designations Port LEDs Each SFP port has its own indication LED. Table 1 describes the RJ-45 and SFP port LED designations. There are two LEDs for each RJ-45 port. Table 1. Port LEDs Device Hardware Interfaces RJ-45 Ports Reset Button Factory Defaults Button Page Desktop Switching Page Step 1: Preparing the Site Step 2: Installing the Switch Installing the Switch on a Flat Surface Rack Mounting the Switch Step 3: Checking the Installation Step 4: Connecting Devices to the Switch Step 5: Applying AC Power Step 6: Managing the Switch using a Web Browser or the PC Utility Page Page A Troubleshooting Chart Additional Troubleshooting Suggestions Network Adapter Cards Configuration Switch Integrity Auto-Negotiation Network Protocol and Standards Compatibility Management Page Electromagnetic Emissions Safety Page Index Numerics A B C R S T U V