Step 7: Connecting Devices to the Switch

The following procedure describes how to connect devices to the switch’s RJ-45 ports. Your NETGEAR Model GSM712/GSM712F Managed Gigabit Switch contains Auto Uplink™ technology, which allows you to attach devices using either straight-through or crossover cables.

Figure 3-8. GSM712 Connecting Devices to the Switch

Figure 3-9. GSM712F Connecting Devices to the Switch

20.Connect each device to an RJ-45 network port on the switch’s front panel (see Figure 3-8 or Figure 3- 9). Use Category 5 (Cat5) unshielded twisted-pair (UTP) cable terminated with an RJ-45 connector to make these connections.

Note: Ethernet specifications limit the cable length between the switch and the attached device to 100 m (328 ft).

Page 20 of 24

Page 21
Image 21
NETGEAR manual GSM712 Connecting Devices to the Switch