NETGEAR JWNR2010v3 manual Package Contents, Step, N300 Wireless Router, Installation Guide

Step 1: Step 2: Step 3:

Installation Guide

N300 Wireless Router

JWNR2010v3

Unplug the power

to turn off your modem.

Connect one end of the blueEthernet cable to your modem,and the other end to the Internet port on your router.

Plug in, then turn on your modem.

Wait approximately two minutes until your modem turns on.

Package Contents

		If your modem has a battery backup,
		first remove and reinsert the battery
Internet		before connecting your
	DSL	modem to power.
	or Cable

Modem N300 Wireless Router

(not included)

N300 Wireless Router

Power adapter Ethernet cable

Step 4:

Connect the power adapter to the router, plug the power adapter into and outlet, and press the

Power On/Off button on the router.

Wait until the Wireless LED turns solid green.

Step 5:

Connect the router to your computer.

Use another Ethernet cable to establish

a wired connection as shown in this diagram.

Optionally, connect wirelessly by using the preset wireless security settings located on the product label on the router.

Step 6:

Open a browser.

If the web page does not display, close and reopen the browser and enter http://routerlogin.net

in the address bar. The user name and password are on the product label on the router.