Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual
Step 4: Scanning for Adapters
After opening Intel Wireless Display (or after agreeing to the license), the application begins scanning for available adapters and the status reads Scanning for adapters.
Figure
If the application does not automatically begin scanning, click the Scan for available adapters button.
Step 5: Detected Adapter
After the scan is complete, any adapters in range will be displayed in the Detected adapters field. If your adapter is not detected, click the Scan for available adapters button. If your adapter still does not appear, see the “There are No Adapters Detected” on page
Detected Adapters Column Information
Headings include: Type, Name, ID, Model, and Signal.
•Type. If this is a first time connection, the circle on the TV icon will be gray. If the connection has been used previously, the icon circle will be orange.
•Name. This refers to the adapter and is initially set by the adapter manufacturer. (If this is the initial set up, you can rename the adapter in a following step. In the example above the adapter has been renamed My Living Room.
