NETGEAR R6200-100NAS user manual 120

Dual Band 11ac WiFi Router R6200

Table 4. Factory default settings (Continued)

Feature		Default behavior
Local network	DHCP starting IP address	192.168.1.2
(LAN) continued
	DHCP ending IP address	192.168.1.254
	DMZ	Disabled
	Time zone	GMT for WW except NA and GR, GMT+1 for GR, GMT-8
		for NA
	Time zone adjusted for daylight	Disabled
	savings time
	SNMP	Disabled
Firewall	Inbound (communications coming	Disabled (except traffic on port 80, the HTTP port)
	in from the Internet)
	Outbound (communications going	Enabled (all)
	out to the Internet)
	Source MAC filtering	Disabled
Wireless	Wireless communication	Enabled
	SSID name	See router label
	Security	WPA2-PSK (AES)
	Broadcast SSID	Enabled
	Transmission speed	Auto*
	Country/region	United States in the US; otherwise varies by region
	RF channel	6 until region selected
	Operating mode	Up to 145 Mbps at 2.4 GHz, Up to 867 Mbps at 5 GHz
Firewall	Inbound (communications coming	Disabled (bars all unsolicited requests)
	in from the Internet)
	Outbound (communications going	Enabled (all)
	out to the Internet)

*. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

Supplemental Information

120