NETGEAR RP614 v4 This screen shows the following parameters, Router Status Fields, Maintenance

RP614v4 Cable/DSL Router Reference Manual

This screen shows the following parameters:

Table 3-1.	Router Status Fields
Field		Description
Account Name		This field displays the Host Name assigned to the router.
Firmware Version		This field displays the router firmware version.
Internet Port		These parameters apply to the Internet (Wire Area Network also referred
		to as WAN) port of the router.
MAC Address		This field displays the Media Access Control address being used by the
		Internet (WAN) port of the router.
IP Address		This field displays the IP address being used by the Internet (WAN) port
		of the router. If no address is shown, the router cannot connect to the
		Internet.
DHCP		If set to FixedIP, the router is configured to use a fixed IP address on the
		WAN.
		If set to Client, the router is configured to obtain an IP address
		dynamically from the ISP.
IP Subnet Mask		This field displays the IP Subnet Mask being used by the Internet (WAN)
		port of the router.
Domain Name Server (DNS)		This field displays the IPaddress(es) of the DNS server(s).
LAN Port		These parameters apply to the Local (LAN) port of the router.
MAC Address		This field displays the Media Access Control address being used by the
		LAN port of the router.
IP Address		This field displays the IP address being used by the Local (LAN) port of
		the router. The default is 192.168.1.1
DHCP		Identifies if the router’s built-in DHCP server is active for the LAN
		attached devices.
IP Subnet Mask		This field displays the IP Subnet Mask being used by the Local (LAN)
		port of the router. The default is 255.255.255.0

3-2 Maintenance

v3.1, June 2008