Reference Manual for the NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch
3-2 Basic Installation and Configuration
202-10083-01
Before you begin, gather your existing network settings such as the TCP/IP addresses and
networking protocols in use.
Verify Printer and Network Readiness
Assure that the following are available:
You have a working Ethernet network running TCP/IP with at least one Windows 98SE, Me,
2000, or XP PC.
You have a printer with a USB port.
Note: The NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch WGPS606
does not support printers using parallel connectors. If your printer uses a parallel connector,
you should use one of the other NETGEAR Print Servers such as the Model PS101 Mini Print
Server.
You may also need to have your printer driver software handy. For most popular printers,
Windows already has the printer driver software available.
Network Setting Default Factory Setting
IP Address Provided automatically via DHCP for
initial setup but will be set to Static IP
by the Smart Wizard during initial
setup for regular operation
Note: Set up the printer you will use directly on a computer and verify that it is working
properly before connecting it to the WGPS606.