I am connected to NETGEAR_EXT and launched a browser. Why can’t I see the web browser setup guide?
Try these troubleshooting steps:
•Make sure that your computer is set up to use DHCP (most are).
•Make sure that the Client Link LED 
is green and that you are using a valid IP address.
•Relaunch the web browser and type www.mywifiext.net or www.mywifiext.com in the address field. Enter admin for the user name and password for the password.
How do I restore the extender to its factory default settings?
1.Use a sharp object such as a pen or paper clip to press and hold the Factory Reset button on the bottom of the extender for at least five seconds until the Power LED blinks amber.
2.Release the Factory Reset button and wait for the extender to reboot.
The extender resets and returns to the factory default settings.
You can now access the extender from your web browser using the factory default settings.
17
