Universal WiFi Internet Adapter (WNCE2001)

Power

Package Contents

Power
Ethernet
LAN

Top and Back Views

Power
WLAN
Reset
button
button
WPS
LED
LED LED Port
USB power
cable
Ethernet cable
WNCE2001
adapter
Installation with WPS
Step 2: Push the WPS button on the
button
WPS
Step 3: Push the WPS button on your router. The WLAN LED
Step 1: Connect the WNCE2001
on the WNCE2001 will stay green for
5 seconds when the wireless connection has been
established.
to your TV, XBox, or Blu-ray
player using the Ethernet
cable (included) and one
of the power connection
options. For more information
on power-up methods,
see “Power Connection
Options” on the reverse side.
WNCE2001. The WLAN LED
will blink amber and green,
showing that the WPS is
running.
Step 4: Congratulations! Your installation is complete.
What is WPS?
If you have a NETGEAR router, this feature is called Push ‘N’ Connect. Look for the or symbols on the router to make sure
the NETGEAR router supports WPS. For non-NETGEAR routers, please refer to the user manual to determine if the router supports WPS.
Once you know whether your router supports WPS, choose the appropriate installation method below.
WPS (WiFi Protected Setup) is a simple and secured way to connect a device to an existing network.
Installation without WPS
Step 1: Please disconnect any wireless connection to the router
and/or remove the Ethernet cable currently connected to
the computer. You may restore the connection after the
WNCE2001 installation is complete.
Step 2: Connect the WNCE2001 to your computer, using the
Ethernet cable (included) and one of the power connection
options. For more information on power-up methods,
see “Power Connection Options” on the reverse side.
Step 3: Open your Internet browser and it will automatically take you
to the setup page. Follow the instructions on the setup page,
then return to this guide and continue to Step 4.
Step 4: Disconnect the Ethernet and USB cables from your computer.
Step 5: Connect the WNCE2001 to your TV, Box, or Blu-ray player.
If your device doesn’t have a USB port, see
“Power Connection Options” on the reverse side.
Step 6: Congratulations! Your installation is complete.
WNCE2001_IG.fm Page 1 Friday, April 9, 2010 3:14 PM