Heat & Glo LifeStyle Montana-36, Montana-42 owner manual

•For installations utilizing an ST1175 Square Termination Cap the last chimney section must not be more than 4-1/2 in. (114 mm) below the chase top. See Figure 6.5.

•For installations utilizing an TCT1175 Terra Cotta Cap the last chimney section must be between 7 in. (178 mm) below the chase top and 2 in. (51 mm) above. See Figure 6.6.

		Flashing Collar
Cap Standoff			2 in. (51 mm) min.
					4-1/2 in.
1-1/2 in.
(38 mm) min.				(114 mm)
overlap	Top of Pipe					max.

1-1/2 in. (38 mm) min. overlap

{

Top of Pipe

The last section of pipe must stop between the distances given below.

2 in. (51 mm) above top of the chase.

7 in. (178 mm) below top

of the chase.

Figure 6.5 Installing an ST1175 Square Termination Cap

Figure 6.6 Installing a TCT1175 Terra Cotta Cap

•For chase installations you can use a TR11 Round Termination Cap, a TR11T Round Telescoping Termination Cap, an ST1175 Square Termination Cap, or a TCT1175 Terra Cotta Termination Cap.

•Install termination caps following instructions provided with them.

Heat & Glo LifeStyles Collection • Montana • 4039-150 Rev I • 08/06 21