Installation Guide
N600 Wireless Dual Band Gigabit Router
WNDR3700v4
Package Contents
Step 1:
Unplug the power
to turn off your modem.
DSL
Step 2:
Connect one end of the yellow Ethernet cable to your modem, and the other end to the Internet port on your router.
(not included) 
Laptop or desktop
computer
Step 5:
Connect your computer to the router ( 
).
Use another Ethernet cable to establish a wired connection
Internet
Power On/Off |
Power On/Off 
Modem
Ethernet cable
Step 3:
N600 Wireless Router
Plug in the power to |
|
turn on your modem. | Step 4: |
as shown in this diagram.
Optionally, connect wirelessly by using the preset wireless security settings, located on the bottom label.
Step 6:
Open a browser.
If the web page does not
N600 Wireless Router
Power adapter
Wait approximately 2 minutes until your modem turns on.
If your modem has a battery backup,
first remove and reinsert
the battery before connecting your modem to power.
Connect the power adapter to the router, then plug it into an outlet.
Wait for the 2.4 GHz LED ( 2.4 GHz ) to light.
If none of the LEDs light, make sure that the Power On/Off button is in the on position (pushed in).
display, close and
this installation guide.
