Installation Guide
N150 Wireless Router
WNR1000v3Package Contents:N150 Wireless Router | Router stand |
Step 1: | Step 2: |
| Unplug the power to turn off your modem. | Connect one end of the yellow Ethernet cable to your |
| modem and the other end to the Internet port. |
DSL |
|
or cable |
|
(not included) | Laptop or desktop |
Internet | computer |
Power On/Off |
|
Ethernet cable | Power adapter |
1. Place the stand on a level surface.
2. Slide the router onto the stand.
Modem
Step 3:
Plug in, then turn on your modem.Wait about 2 minutes until your modem turns on.If your modem has a battery backup, first remove and reinsert the battery before connecting your
modem to power.Power On/Off
N150 Wireless Router
Step 4:
Connect the power adapter to the router and plug it intoan outlet. Wait for the Wireless LED (
) to light.If no LEDs light, make sure the Power On/Off button is in the on position (pushed in).
Step 5:
Connect your computer to the router.Use an Ethernet cable (not included) to establish a wired connection.
Or connect wirelessly by using the preset wireless security settings located on the bottom label.
Step 6:
Open a web browser.Your browser automatically connects to your router so you can set it up. See the instructions on the other side.
