User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
Basic Setup 3-5
Install the NETGEAR RangeMax™ Wireless
PCI Adapter WPN311.
a. Shut down the PC and remove the
power cord. Insert the WPN311
Wireless PCI Adapter into an available
PCI slot.
Connect the antenna to the adapter and
position the antenna to the up position.
Reconnect the power cord and reboot
the computer.
b. The Found New Hardware Wizard
displays. Click Next and follow the
prompts to proceed.
c. When prompted, choose the country
where you are located from the list.
d. You also will be prompted to enable
the NETGEAR Smart Wireless
Settings Utility configuration utility.
e. Click Yes to accept this option.
If you choose No, you must read the
Windows XP documentation to learn
how to use the Windows XP wireless
network configuration utility.
f. After the installation completes, click
Finish to close the wizard.
You should see the WPN311 system tray
icon on the lower right portion of the
Windows task bar.
Windows XP displays a Wireless Network
Connection message.
Fo un d N e w H ard wa re W iz ard
Note: If yo u a re p rom pted wi th a W i nd ows X P Lo go
Testing message, click Continue Anyway.
Wi ndows XP N etwork Conn ection Alert
WPN311 System Tray Icon