User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
3-8 Basic Setup
For Windows 2000 & 98SE/Me Users Installing a WPN311
Install the WPN311 software.
Note: Windows 2000 may require you to be
logged on with administrator rights.
a. Power on your computer, let the
operating system boot up completely,
and log in as needed.
b. Insert the Resource CD for the
WPN311 into your CD drive. The CD
main page shown at the right will load.
c. Click the “Install Driver & Utility”
link.
d. Follow the Smart Wizard - Install
Assistant steps, and click Finish when
done to restart your computer.
Note: If you are prompted to restart your
computer, choose instead to shut it down. This
will let you install the WPN311 before
restarting. Windows will find the new
hardware and can use the software you
installed.
WPN311 Resource CD
Smart Wizard - Install Assistant