User Manual for the NETGEAR RangeMax™ Wireless PC Card WPN511
Basic Setup 3-7
February 2005
Verify wireless connectivity to your network.
a. Verify that your Connection and Status Monitor information matches your wireless
network.
b. Check the two LEDs on the WPN511:
c. Verify connectivity to the Internet or network resources.
Note: If you are unable to connect, see troubleshooting tips in the Basic Installation section
of the Reference Manual on the NETGEAR RangeMax™ Wireless PC Card WPN511
Resource CD.
LED 1
LED 2
Table 3-1. LED Descriptions
LED 1 LED 2 Meaning
Sl ow b lin k O FF P ower s ave m od e (d efa ul t from p owe r up or re set)
Alternate
blink Alternate
blink Looking for network association
Power LED goes ON; Network LED is OFF; then Power
LED goes OFF and Network LED goes ON
Slow blink Slow b link Associated or joined with network; no activity
Fast blink Fast blink A ssociated or joined with network; blink rate increases
wi th a cti vi ty o n the n etw ork ov er th e ai r o r lo ca ll y o n th e
network
OFF OFF No power applied to the card