NETGEAR XM128S manual Plug-and-Play support for a Windows 95 environment

Getting Started Using FirstGear for the Model XM128S ISDN Digital Modem

The Model XM128S modem has the following speed and compatibility features:

•Plug-and-Play support for a Windows ® 95 environment

•Full compatibility with both ISDN and remote public-switched telephone network (PSTN) by way of ISDN

•Multiple signaling protocol compatibility with DSS1, 1TR6, NI-1, AT&T 5ESS, and Northern Telecom DMS 100 network switches

•X.75, V.110, V.120, and Point-to-Point Protocol (PPP)

•B channel speeds of 56 Kbps (in-band signaling) and 64 Kbps (out-of-band signaling)

•112 Kbps/128 Kbps channel bundling: MLP and Multipoint PPP (RFC1717)

•Hi/fn LZS compression (Stac)

•V.42bis data compression using the X.75, V.120, and bundle protocols

•Configurable using either FirstGear (a Windows 95 utility) or AT commands

•Automatic ISDN and analog call detection

•Two analog telephone jacks (analog adapters)

•Push-button switch for quick dial and teardown

•Easy-to-use FirstGear configuration software

•Flash EPROM for easy firmware upgrades

1-2 Introduction