![](/images/new-backgrounds/1166381/16638149x1.webp)
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem
You have a choice between launching this application automatically during the installation of FirstGear or running it later from the NETGEAR program group folder. Before you can run the Wizard, you must perform the following steps:
1.You must first have an active ISDN line (provided by your local telephone company).
2.You must connect the Model XM128U modem to your PC and the ISDN line as described on page
3.Make sure that power has been applied to the modem and the PWR LED is on.
4.Install the Windows 95/NT drivers as described on page
If you opted not to launch the Wizard automatically during FirstGear installation, do so now by
The introduction screen opens as shown in Figure
Figure 3-7. Introduction screen
Installation |