![](/images/new-backgrounds/1166381/16638157x1.webp)
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem
If the Wizard is unable to determine the SPID and/or switch values, you will be prompted to enter these values directly. Refer to the information supplied by your local telephone company. The ISDN Settings menu tab, as illustrated in Figure
Figure 3-11. ISDN Settings menu tab screen
To enter the SPID and switch values directly:
1.Enter each of the values into the corresponding fields. The telephone numbers have already been entered based on values entered earlier.
2.Enter the corresponding SPID numbers and select the switch type from the
3.Click on OK to continue.
Based on these new values, the Wizard attempts a test call. If the call fails, you will be prompted once again to recheck the values. If the problem persists, contact NETGEAR customer support.
Installation |