6-6 Getting Started Guide
3.If you selected PPP data link encapsulation in the DSL Line Configuration screen, a PPP Authentication menu item appears. The authentication protocol and user name/password combinations you enter must be assigned or agreed to in advance between you and your ISP. Select PPP Authentication and press Return.
From the
•PAP is the most common, and requires you to enter a User Name and Password in the next two fields.
•CHAP requires you to enter a Host Name and Secret in the next two fields.
4.Press the Down arrow key until you reach NEXT SCREEN. Press Return to bring up the next screen.
3. IP Easy Setup
The IP Easy Setup screen is where you enter information about your Netopia Router’s:
•Ethernet IP address
•Ethernet Subnet mask
•Domain Name
•Domain Name Server IP address
•Default gateway IP address
Consult with your network administrator to obtain the information you will need. For more information about setting up IP, see the Firmware User’s Guide chapter on “IP Setup”.
IP Easy Setup |
|
Ethernet IP Address: | 192.168.1.1 |
Ethernet Subnet Mask: | 255.255.255.0 |
Domain Name: | isp.net |
Primary Domain Name Server: | 209.3.224.21 |
Secondary Domain Name Server: | 209.3.224.20 |
Default IP Gateway: | 127.0.0.2 |
IP Address Serving: | On |
Number of Client IP Addresses: | 100 |
1st Client Address: | 192.168.1.100 |
PREVIOUS SCREEN | NEXT SCREEN |
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.
1.Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given you only if you are not using Network Address Translation (NAT). This will be the Netopia Router’s IP address.
The Ethernet IP Address defaults to an address (192.168.1.1) within a range reserved by the Internet address administration authority for use within private networks.
