Netopia 4622 T1 manual Frame Relay Options PPP Options

Easy Setup 6-7

7.Select Channel Data Rate and highlight the data rate that your service provider has designated your channel to connect at. The channel data rate choices are Nx56k or Nx64k. The default is Nx64k. Press Return.

8.Select Data Link Encapsulation and highlight the method of encapsulation that you want to use from the pop-up menu. The choices offered are PPP, RFC1483, HDLC (Cisco), and Frame Relay. The default setting is Frame Relay.

The screen will offer different options depending on your selection.

Frame Relay Options PPP Options

	T1 Line Configuration
Operation	Mode...	Normal
Line Encoding...		B8ZS
Framing Mode...		ESF
Number of	DS0 Channels:	1
First DS0	Channel:	1
Channel Data Rate...		Nx64k
Data Link	Encapsulation...	Frame Relay
PPP over Frame Relay Enabled:		On
DLCI:		16
LMI:		None
TO MAIN MENU		NEXT SCREEN
Return/Enter takes	you back to previous screen.
Enter Information supplied to you by your telephone company.

	T1 Line Configuration
Operation	Mode...	Normal
Line Encoding...		B8ZS
Framing Mode...		ESF
Number of	DS0 Channels:	1
First DS0	Channel:	1
Channel Data Rate...		Nx64k
Data Link	Encapsulation...	PPP
PPP Mode...		VC Multiplexed
TO MAIN MENU		NEXT SCREEN
Return/Enter takes	you back to previous screen.

Enter Information supplied to you by your telephone company.

RFC 1483 Options ATM Operation Mode Options

T1 Line Configuration
Operation Mode...	Normal
Line Encoding...	B8ZS
Framing Mode...	ESF
Number of DS0 Channels:	1
First DS0 Channel:	1
Channel Data Rate...	Nx64k
Data Link Encapsulation...	RFC1483
RFC1483 Mode...	Bridged 1483
PPP over Ethernet (PPPoE):	Off
TO MAIN MENU	NEXT SCREEN
Return/Enter goes to new screen.
Enter Information supplied to you by your telephone company.

T1 Line Configuration

Operation Mode...	ATM
Line Encoding...	B8ZS
Framing Mode...	ESF
Number of DS0 Channels:	1
First DS0 Channel:	1
Data Link Encapsulation...	RFC1483
RFC1483 Mode...	Bridged 1483
PPP over Ethernet (PPPoE):	Off
Data Circuit VPI (0-255):	0
Data Circuit VCI (32-65535):	35
TO MAIN MENU	NEXT SCREEN

Return/Enter goes to new screen.

Enter Information supplied to you by your telephone company.

■If you selected Frame Relay as a Data Link Encapsulation method, the PPP over Frame Relay Enabled toggle appears.

If you toggle PPP over Frame Relay Enabled to On, the DLCI field appears, allowing you to enter a DLCI value (16 is the default). The LMI option also appears, allowing you to select from ANSI (Annex D), CCITT (Annex A), LMI, or None from the pull-down menu.

■If you selected PPP, the next pop-up menu PPP Mode offers the choice of VC Multiplexed or LLC SNAP.