3
Netopia 3D Reach Utility Installation
Netopia 3D Reach Utility Installation
For Microsoft Windows 98SE, ME, 2000
1.
Insert the CD. The Setup utility will run automatically and load the driver for the Netopia
3D Reach Wireless PC Card.
When the installation is complete, a new Wireless communication icon will appear in
your system tray in the Windows toolbar.
2.
Click the Wireless icon to start the Netopia WLAN Utility. See “Start the Netopia 3D
REACH Utility” on page 4.
For Microsoft Windows XP
1.
Insert the CD. The Setup utility will run automatically and load the driver for the Netopia
3D Reach Wireless PC Card.
When the installation is complete, a new Wireless communication icon will appear in
your system tray in the Windows toolbar.
2.
Click the Wireless icon to start the Windows Zero Configuration Utility. Refer to
Microsoft for documentation on the utility.
Macintosh Mac OS X 10.2 and higher and Linux drivers
The Netopia 3-D Reach Utility only supports Windows 98, 2K, ME, and XP. Additional driver
support for other Operating Systems may be downloaded from the Ralink Support website
at
www.ralink.com.tw
. These drivers have not been tested and are not supported by
Netopia.