RAD Data comm ASMi-31 operation manual Figure F-2 Installation of Two Units, To install two units

Models: ASMi-31

1 66
Download 66 pages 22.67 Kb
Page 65
Image 65

ASMi-31Installation and Operation Manual

Appendix F. Installation in 19" Rack

 

 

Figure F-2 Installation of Two Units

To install two units:

1.Fasten one long side rail to each unit (right side to one unit, left side to the other unit) using the four screws supplied. The side rails must be attached in opposing fashion, the narrow flange of the first rail opposite the wide flange of the second rail.

2.Attach one short bracket opposite the side rail on each unit using the four screws supplied.

3.Slide the side rail of one unit into the side rail of the other unit, fastening the two units together (see Figure F-3).

4.Secure the supplied plastic caps to the ends of the rails, to prevent the units moving and to protect the rail ends.

The assembled units can now be fastened to the side rails of the 19" rack by means of four screws to each side(not included in the kit).

Installation of the ASMi-31 Unit in 19" Rack

F-3

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610

www.bestdatasource.com

Page 65
Image 65
RAD Data comm ASMi-31 operation manual Figure F-2 Installation of Two Units, To install two units