CradlePoint USB-Host to Ethernet Ada
p
ter User Guide
o
ection is established.
If Establish TCP/IP Connection is also checked, the application is
run after the conn
Checking this option automatically un-checks the
aunch ActiveSync” option, if it was checked. “L
o Tapping Browse displays the Select
Application dialog.
y command-line
ginal settings dialog with
o
and filename of the
o parameters associated with the
etween the terminal and the cradle. The default
cradle.
olity to
If necessary, you can browse for the
application and enter an
parameters.
Pressing OK accepts the entries and
returns to the ori
the new entries displayed.
Pressing X (Close) returns to the original
settings dialog.
Application to be Launched text box –
displays the path
selected application.
Params – Displays any command-line
application.
o Serial Port Baud Rate – Selects the baud rate for the serial
connection b
connection is 115,200 baud. Set the appropriate rate for your
Query cradle for DNS domain – Some cradles have the abi
present the DNS domain name to eConnect. Checking this will direct
eConnect to query the cradle for the domain name and store that in
the terminal registry.
This option is enabled only if Establish TCP/IP
onnection is checked. C
When you are done, press OK at the top of the screen.
Step 6 – Finishing network, as described
ns. Make sure the MC1000 cradle is also plugged into an active
n action or launch an application (if you have it configured to do
Up Connect the MC1000 to the PS6U1UHE device and to your
in the next sectio
power outlet.
Turn on the power to the MC1000 and place it into the cradle to start a
synchronizatio
so).
5 CradlePoint, Inc