Network Computing Devices PS6U1UHE Connecting the MC1000 to the PS6U1UHE

CradlePoint USB-Host to Ethernet Ada

ter User Guide

Connecting the MC1000 to the PS6U1UHE

Setting up your PS6U1UHE is easy and includes only these

simple steps.

1. Connect the Power Supply (PN 170140-000), as

shown below.

2. Connect the MC1000 to the PS6U1UHE using the USB

Mini-A to Mini-B Cable (PN 170373-000), as shown

below.

3. Connect the Ethernet Cable to the network (see the

Section “Connecting the PS6U1UHE to your Network

for more information.)

6 CradlePoint, Inc

Contents

Main Trademarks Contents Introduction Getting Started Before You Begin Connecting to the PS6U1UHE Setting up the MC1000 Installing eConnect on the MC1000 Step 2 Verify MC1000 Configuration Step 3 eConnect Installation Step 4 Install the CAB File Step 5 Co figuring eConnect n Step 6 Finishing Up Connecting the MC1000 to the PS6U1UHE Connecting the PS6U1UHE to your Network Partnerships with More than One Desktop/Laptop PC When You Cant Use DHCP Uninstall eConnect Manual Removal Product/Technical Support Product Registration Troubleshooting Other ActiveSync Problems Appendix A Regulatory Information Radio Frequency Interference Requirement FCC Statement Radio Frequency Interference Requirement - Canada Appendix B Warranty