Network Technologies PS/2 KVM Edit Mode screen, Erase previous character, Function, Keystroke

NTI KEEMUX Series PS/2 KVM Switch

Edit Mode

Edit Mode allows the user to modify the names of the CPUs connected to the switch. Names of CPUs can be up to 12 characters in length. To enter Edit Mode press <Ctrl> + <E> from Command Mode. When in Edit Mode, multiple keystroke combinations are not valid (<SHIFT>+<P>, <CTRL>+<P>, <ALT>+ <P>, and <P> will all type a “P” to the display - lower case letters cannot be typed). After changes have been made the user will be prompted by the menu to save the changes. Answer "Y" to save changes and answer "N" to continue using previously entered port names.

Function:

Move cursor one position to the right

Move cursor one position to the left

Previous port

Next port

Selects the first port on the switch

Selects the last port on the switch

Toggles between insert and overstrike

Erase current character

Keystroke:

Home

End

Figure 12- Edit Mode screen

Insert (The character either gets inserted and the remainder of the name gets shifted to the right, OR the current character gets overwritten.)

Delete

Erase previous character Backspace

When finished making changes in Edit Mode, press <Enter> and a prompt will appear to press either <Y> to save the changes or <N> to continue making changes without saving the changes just made. If the <ESC> key is pressed instead of <Enter>, all changes made will be cancelled and the display will return to the previous menu.

15