Network Technologies SM-nXm-AV-LCD operation manual Control Options, Jack

6.Connect a monitor to the port labeled MONITOR 1 on the rear of the VEEMUX-A (see Fig. 2).

7.Repeat step 6 for remaining monitors (outputs).

8.Connect audio output device (speakers) to port labeled AUDIO OUT 1.

9.Repeat step 8 for remaining audio output devices, connecting them to any remaining AUDIO OUT ports.

10.If using RS232 control, connect the video source's serial port to the VEEMUX-A “RS232” with a DINT-xx.

11.Plug the VEEMUX-A to an AC power outlet.

12.Turn ON power to the VEEMUX-A.

13.Turn ON power to any or all of the video and/or audio sources connected to the VEEMUX-A.

RearViewofVEEMUX-A

	3.5mmStereo			AUDIOOUT(USER)					AUDIOIN (CPU)
	Jack		7	5	3	1		7	5	3	1
			8	6	4	2		8	6	4	2
	NETWORK	VIDEO7	VIDEO5	VIDEO3		VIDEO1	MONITOR7	MONITOR5	MONITOR3		MONITOR1
	TECHNOLOGIES
	NTINCORPORATED
	1275DannerDr Tel:330-562-7070						MONITOR8	MONITOR6	MONITOR4		MONITOR2
R	Aurora,OH44202Fax:330-562-1999 VIDEO8		VIDEO6	VIDEO4		VIDEO2
S	www.nti1.com
2
3
2
	Speakers

15HDFemale VideoConnector

15HDMale VideoConnector

3.5mmStereo Plug

VGA

Multi-Scan

Monitor

Figure 2- Install Monitors and Speakers

Control Options

The VEEMUX-A Audio/Video Matrix Switch has three methods of control: Front Panel Keypad, RS232, or Infrared. Every unit comes standard with the Front Panel Keypad and RS232 built-in. If desired, the Infrared option must be requested at the time of the order. The Infrared option requires the purchase of a separate remote control device (Infrared transmitter) as well as an Infrared receiver to be installed in the unit. No software is involved (see page 14 – Infrared Control). With the RS232 option, there are no external devices to be purchased. NTI provides Software commands as well as a test program to ensure the RS232 functions properly (see page 8 – RS232 Control).

5