Network Technologies ST-nXm-U SerTest- RS232 Interface Test Program, Main Options, Selection

NTI NODEMUX MULTI-USER UNIVERSAL KVM SWITCH

SerTest- RS232 Interface Test Program

This software allows a user to test the functions of an NTI server switch, matrix switch or Multi-user/Multi-platform switch RS232 interface. The program SerTest along with the Matrix Switcher's Control Program is installed from the CD packaged with this switch. SerTest generates a main menu with the selections described below:

Main Options

•	Matrix Operations	- send commands to the matrix unit.
•	Ethernet Operations	- set Ethernet connection variables (not applicable to this product)
•	Setup Options	- set COM port, baud rate, and unit address
•	About SerTest	- display the program version

Matrix Operations

	Key		Selection		Description
1)			Connect Output/User to an Input/CPU		- connect an output to an input
2)			Connect All Outputs/Users to an Input/CPU	- connect all outputs to an input
3)			Connect Audio Output/User to an Input/CPU		- connect an output to an input (audio ports only)
4)			Connect All Audio Outputs/Users to an Input		- connect all outputs to an input (audio ports only)
	5)		Change Mute Status for Audio Output/User (not		- mute or un-mute the Audio port output
			applicable to this unit)
	6)		Change Volume for Audio Output/User (not		- change Audio port output volume
			applicable to this unit)
7)			Read Connection for Video Output/User		-read the connection of a specific video output
8)			Read Connection for Audio Output/User		-read the connection of a specific audio output
	9)		Read Mute and Volume for Audio Output/User	- read the volume and the mute status of the specified output (audio
					ports only)
	a)		Save I/O Connections into Unit Memory	-save the connections into switch memory bank
	b)		Restore I/O Connections from Unit Memory		-restore the connections from switch memory bank
	c)	Change All Units Baud Rate (9600/COM1:)			-change RS-232 Baud rate of all switches
					-the current baud rate and serial port are displayed in parentheses
	d)		Reset Unit		- send a reset command to the switch
					- the current unit address is displayed in parentheses
	e)		Reset All Units	- send an internal reset command to all switches
	f)	Read Unit Size			- read the switch size (number of inputs and outputs)
	g)		Read Unit Version/Revision String		-read a string containing the switch version, type, and size
	h)		Save All Units I/O Connections into Units		-save the connections into switch memory bank, command for all
			Memory		switches
	i)		Restore All Units I/O Connections from Units		-restore the connections from switch memory bank, command for all
			Memory		switches

Selections in the "Key" column that are gray are not applicable to this product.

24