NTI UNIMUX SERIES USB KVM SWITCH

USING THE UNIMUX DVI KVM SWITCH

Once the UNIMUX is properly connected, the UNIMUX will enable a connection to be made between the CPUs attached to its VIDEO and CPU ports and the monitor and input devices attached to the MONITOR and USB Device ports. The LEDs on the control panel of the UNIMUX will illuminate depending on which port (and corresponding CPU) is being connected to the monitor and input devices.

The UNIMUX can be controlled by three methods:

•front control panel using touch-switches and LEDs

•keyboard control through Command Mode

•RS232 control (page 12-optional)

Front Panel Control

There is a touch-switch and LED on the front panel of the UNIMUX for each CPU the switch will connect the monitor and input devices to. Pressing any touch-switch on the front panel of the UNIMUX will connect the corresponding CPU to the monitor and input devices.

Holding down any front panel touch-switch for more than 2 seconds will cause the UNIMUX to cycle through all modes of operation including COMMAND, BROADCAST, SCAN, and NORMAL (described in "Command Mode" below). The three MODE LEDs on the front panel indicate which mode is selected. Release the touch-switch when the LEDs indicate the desired mode. When no mode LEDs are illuminated the user is in Normal Mode controlling directly the CPU to which the user is connected through the UNIMUX.

Keyboard Control

Keyboard control of the UNIMUX can be achieved using Command Mode (below). The keyboard can be used to control all functions of the UNIMUX as an alternative to using the front panel on the UNIMUX.

By pressing <Ctrl> + < ` > (accent/tilde key), the user can enter Command Mode. Once in Command Mode, typing a series of commands will cause the UNIMUX to connect the user to any one CPU connected to the switch. Pressing the <Esc> key will exit Command Mode.

Command Mode

In order to control the UNIMUX with the keyboard connected, Command Mode must be enabled. To enter Command Mode from the keyboard:

Press

Ctrl

~

(ACCENT/TILDE

`

KEY)

 

 

 

When the COMMAND LED is illuminated, all 3 status lights on the keyboard will illuminate (if they aren't already due to caps lock, scroll lock, and/or num lock) to indicate that Command Mode is enabled and the following functions are available:

Basic Command Functions

 

 

 

 

 

 

 

 

Function:

Keystroke:

 

 

 

 

 

 

 

Increment Port

 

I

or

 

 

(select the next higher port

 

 

 

ex. 03

04)

 

 

 

 

D

or

 

 

(select the next lower port

Decrement Port

 

 

 

ex. 02

01)

 

 

Toggle Scan Mode

 

S

(The SCAN Mode LED will

 

 

ON and OFF

 

also toggle ON and OFF)

 

 

Toggle Broadcast Mode

 

(The Broadcast Mode LED

 

 

B will toggle ON and OFF.)

 

 

 

ON and OFF

 

 

 

 

Sets scan time-out

 

T

-

(0-2)

-

(0-9)

-

(0-9)

period for each port.

 

x

x

 

x

 

 

 

 

 

 

 

 

 

 

KEY SYMBOLS LEGEND:

or

PRESS EITHER KEY

+

CHORDED SEQUENCE- PRESS CONSECUTIVELY

AND KEEP KEYS PRESSED UNTIL ALL ARE PRESSED.

-

PRESS CONSECUTIVELY

(xxx from 002 to 255. ie. T002 would set the time-out period for 2 seconds)

9

Page 11 Page 13
Page 12
Image 12
Network Technologies USB DVI KVM Using the Unimux DVI KVM Switch, Front Panel Control, Keyboard Control, Command Mode
Page 11 Page 13

UNIMUX-DVI-x, USB DVI KVM specifications

In today's technology-driven world, managing multiple devices efficiently is a necessity for many businesses and tech enthusiasts. One solution that stands out is the USB DVI KVM switch, specifically the UNIMUX-DVI-x model. These devices serve as a critical interface, allowing users to control multiple computers from a single keyboard, monitor, and mouse setup.

The UNIMUX-DVI-x USB DVI KVM switch is designed to facilitate seamless switching between multiple computers. Its primary feature is its support for DVI video, ensuring high-resolution output that caters to professional environments where display quality is paramount. With DVI compatibility, users can enjoy stunning visuals without the need for additional adapters, making installation straightforward and efficient.

One of the standout features of the UNIMUX-DVI-x is its ability to support USB peripherals. This includes not only keyboards and mice but also USB storage devices and printers. The KVM switch allows users to share these devices among the connected computers effortlessly. This functionality promotes a streamlined workspace, eliminating the clutter of cables and giving users the flexibility to switch control between different systems with ease.

Technologically, the UNIMUX-DVI-x incorporates advanced switching mechanisms that guarantee a fast and reliable response time. Users can switch between connected computers with just a push of a button, which is essential in fast-paced environments where time is of the essence. Additionally, the device supports multiple resolutions, catering to a wide range of displays and ensuring compatibility with various systems.

Another characteristic that enhances the usability of the UNIMUX-DVI-x is its compact and robust design. Built for longevity, this KVM switch is equipped with durable materials that withstand the rigors of daily use. Whether in a corporate office, a server room, or a home setup, its compact design allows it to fit into tight spaces without compromising functionality.

Furthermore, the UNIMUX-DVI-x supports cross-platform compatibility. It works seamlessly with both Windows and macOS systems, making it a versatile choice for users operating diverse computing environments. This feature positions it as an ideal tool for IT professionals who manage different operating systems.

In conclusion, the USB DVI KVM switch UNIMUX-DVI-x is a powerful device that blends advanced technology with user-friendly features. It caters to the needs of professionals by providing robust video resolution, support for USB peripherals, compact design, and cross-platform compatibility, thereby simplifying the management of multiple computers in today’s interconnected world.
Top Page Image Contents