Network Technologies USB DVI KVM 9D Female, Unit #2, Not connected to, source connector, Jumper

NTI UNIMUX SERIES USB KVM SWITCH

DIP SWITCH				UNIT ADDRESS
8	7	6	5
OFF	OFF	OFF	OFF	0 (not valid)
OFF	OFF	OFF	ON	1	(default)
OFF	OFF	ON	OFF	2
OFF	OFF	ON	ON	3
OFF	ON	OFF	OFF	4
OFF	ON	OFF	ON	5
OFF	ON	ON	OFF	6
OFF	ON	ON	ON	7
ON	OFF	OFF	OFF	8
ON	OFF	OFF	ON	9
ON	OFF	ON	OFF	10
ON	OFF	ON	ON	11
ON	ON	OFF	OFF	12
ON	ON	OFF	ON	13
ON	ON	ON	OFF	14
ON	ON	ON	ON	15

Note: Pin 4 on the RS232 dip switch is not used.

Note: The "loop back" RS232 dip switch (RS232 dip switch 1) should be ON for each unit in the chain.

In order to connect multiple switches (up to 15) with RS232 connections to the same CPU, an NTI Matrix-Y-1 cable must be used. Connect the Matrix-Y-1 cable between the RJ45-to-DB9 serial adapter (provided with the RS232 option) and the CPU as shown in Fig. 11.

RS232	Matrix-Y-1	Matrix-Y-1	Matrix-Y-1
CPU Serial Port
				Note: The maximum combined
RJ45	RJ45		RJ45	RS232 cable length between the
				CPU and any NTI switch cannot
TO DB9	TO DB9		TO DB9	exceed 15 feet.
SERIAL	SERIAL		SERIAL
ADAPTER	ADAPTER		ADAPTER
CAT5 CABLE		CAT5 CABLE	CAT5 CABLE
RS232		RS232	RS232
NTI		NTI	NTI
SWITCH		SWITCH	SWITCH
First Unit	Second Unit		Last Unit
Figure 11- RS232 connection with Matrix-Y-1 cable
		Wiring Schematic of Matrix-Y-1 cable
		9D Male	9D Female	9D Male
		(Unit #1)	(Source)	(Unit #2)
		2		3
		3	3		Not connected to
		5	5	5	source connector
			2	2

7

8 Jumper

1

4 Jumpers

6

Figure 12- Pinout of Matrix-Y-1 cable

13