
6.Einige Hinweise zur Pflege von Mikrophonen
Staubschutz verwenden: Mikrophone, die nicht im Ein- satz sind, sollte man nicht auf dem Stativ einstauben lassen. Mit einem Staubschutzbeutel (nicht fusselnd) wird dies verhindert. Wird ein Mikrophon längere Zeit nicht verwendet, sollte es staubgeschützt bei norma- lem Umgebungsklima aufbewahrt werden.
Popschutz verwenden: Ein Popschutz hat nicht nur die Aufgabe, bei Gesangsaufnahmen die Entstehung von Poplauten zu verhindern. Er vermeidet auch effizient, daß sich von der Feuchtigkeit des Atems bis hin zu Essensresten unerwünschte Partikel auf der Membran ablagern.
Keine überalterten Windschutze verwenden: Auch Schaumstoff altert. Das Material kann brüchig und krü- melig werden. Anstatt das Mikrophon zu schützen, kann er dann zur Verunreinigung der Mikrophonkap- sel führen. Überalterte Windschutze also bitte ent- sorgen.
Funktionstest: Moderne Kondensatormikrophone neh- men durch lautes Ansprechen keinen Schaden. Zur Kontrolle, ob ein solches Mikrophon angeschlossen ist, sollte man es aber keinesfalls anpusten oder anpop- pen, da dies einem akustischen Signal von mehr als 140 dB (!) entsprechen kann. Normale Sprache ge- nügt zum Funktionstest völlig.
Selbsthilfe kann teuer sein! Leider kommt es doch vor, daß durch eine Selbstreparatur mehr beschädigt als behoben wird. Insbesondere das Reinigen ver- schmutzter Kapseln erfordert viel Erfahrung und die Hand eines Fachmanns. Der Lackschutz auf Platinen zeigt u.a. an, daß dort nicht gelötet werden darf. Eini- ge Bauteile sind speziell selektiert und können nicht durch Material von der Stange ersetzt werden. Um unnötige Kosten zu vermeiden, empfiehlt sich die Ein- sendung an unsere Vertretungen oder an uns.
Inspektion durchführen lassen: Regelmäßiges Durch- checken des Mikrophonbestands, wie es einige Schau- spielhäuser und Rundfunkanstalten praktizieren, kann bei der Früherkennung von Schäden helfen. Leichte Verschmutzungen lassen sich eher beseitigen, als eine untrennbar in die Membran eingebrannte Nikotin- schicht. Insbesondere bei Mikrophonen im Verleih und in verunreinigenden Umgebungen empfiehlt sich die regelmäßige Kontrolle, deren Kosten im Vergleich zu einer aufwendigen Reparatur sehr gering sind.
6.Hints on Microphone Maintenance
Use a dust cover: Microphones not in use should not be left on the stand gathering dust. This can be prevented by the use of a
Use a pop screen: A pop screen not only prevents the occurrence of plosive pop noises in vocal record- ings, but also efficiently prevents unwanted particles, from respiratory moisture to food remnants, from settling on the diaphragm.
Avoid the use of old wind shields: As the foam material of a wind shield ages it can become brittle and crumbly. Instead of protecting the microphone, an old wind shield can thus lead to soiling of the microphone capsule. Therefore please dispose of
Function testing: Although modern condenser microphones are not harmed by high sound pressure lev- els, one should under no circumstances use a pop- test to check whether the microphone is connected and the channel on the mixing console is pulled up, since this can result in sound pressure levels of over 140 dB! Normal speech is quite sufficient for function testing.
Regular inspections: Sending in microphones regularly for inspection, as practiced by some theaters and broadcasting corporations, can aid in the early detection of damage. Slight soiling can be removed much more easily than a nicotine layer inextricably bonded to the diaphragm. Regular inspections are particularly to be recommended for microphones which are rented or are used in dusty or smoky environments, since the costs are low in comparison with the cost of a major overhaul.
7. Zubehör
Weitere Artikel sind im Katalog „Zubehör“ beschrie- ben.
7.1 Stativgelenke
DS 120 ................................. sw .............................
Das Doppelstativ DS 120 hat eine 150 mm lange Schiene, die zwei verschiebbare
7.2 Tisch- und Fußbodenständer
MF 3 ........................................ sw .............................
Der Mikrophonfuß MF 3 ist ein Tischständer mit Eisen- fuß, 1,6 kg schwer, Durchmesser 110 mm. Der Ständer ist schwarzmatt lackiert und steht gleitfest auf einer Moos- gummischeibe. Ein umwendbarer Gewindezapfen und ein mitgeliefertes Reduzierstück ermöglichen die Ver- wendung für 1/2"- und
MF 4 ........................................ sw .............................
Der Mikrophonfuß MF 4 ist ein Fußbodenständer aus Grauguß, ca. 2,6 kg schwer, Durchmesser 160 mm. Der Ständer ist schwarzmatt lackiert und steht gleitfest auf einem Gummiring. Ein umwendbarer Gewindezapfen und ein mitgeliefertes Reduzierstück ermöglichen die Verwendung für 1/2"- und
7.3 Stativverlängerungen
Die Stativverlängerungen STV... werden zwischen Fuß- bodenständer und Mikrophonhalterung geschraubt. Da- durch entstehen unterschiedlich hohe Tisch- oder Fußbodenstative.
Die STV... haben eine Länge von 40, 200, 400 oder 600 mm. Durchmesser: 19 mm.
STV 4 ...................................... | sw ............................. | |
STV 20 ................................... | sw ............................. | |
STV 40 ................................... | sw ............................. | |
STV 60 ................................... | sw ............................. |
7.4 Elastische Aufhängung
Um mechanische Erschütterung fernzuhalten, emp- fiehlt sich die Verwendung einer elastischen Mikro- phonaufhängung.
7. Accessories
Further articles are described in the catalog “Acces- sories”.
7.1 Stand Mounts
DS 120 ................................. blk .............................. Cat. No. 07343
The double mount DS 120 has a 150 mm long support bar with two movable 1/2" threaded studs. Two microphones in their mounts can be attached. The spacing and angle between the microphones can be freely chosen. It has a
7.2 Table and Floor Stands
MF 3 ........................................ blk .............................. Cat. No. 07321
Table stand with iron base, 1.6 kg, 110 mm in diam- eter. The table stand has a matte black finish and rests on a nonskid rubber disk attached to the bottom. A reversible stud and a reducer for 1/2" and 3/8" threads are also supplied.
MF 4 ........................................ blk .............................. Cat. No. 07339
Floor stand with grey cast iron base, 2.6 kg, 160 mm in diameter. The floor stand has a matte black finish and rests on a nonskid rubber disk attached to the bot- tom. A reversible stud and a reducer for 1/2" and 3/8" threads are also supplied.
7.3 Stand Extensions
The STV... stand extensions are used between microphone and floor stands to provide table or floor stands of variable heights.
The STVs are 40, 200, 400 or 600 mm long. Diame- ter: 19 mm.
STV 4 ...................................... | blk .............................. | Cat. No. 06190 |
STV 20 ................................... | blk .............................. | Cat. No. 06187 |
STV 40 ................................... | blk .............................. | Cat. No. 06188 |
STV 60 ................................... | blk .............................. | Cat. No. 06189 |
7.4 Elastic Suspension
The use of an elastic suspension is recommended to prevent the microphone from being exposed to strong mechanical vibrations caused by structure borne shock waves.
12 |
|
|
| 13 |
|
|
| ||
|
|
| ||
|
|
|
|
|