Step 7: Attach the Side
Discharge Chute or Rear
Bagger
The side discharge allows the cut grass to be properly discharged, which prevents clogging.
1.Raise the hinged discharge guard on the back of the mower.(Figure 12a)
2.Orient the chute as shown in (Figure 12). Position the top front groove of the chute over the support rod (Figure 12a) and lower the chute into place. (Figure 12b)
3.Lower the hinged discharge guard.
Other discharge options are available for your NEUTON Mower. With the rear bagger, you can bag the cut grass; with the mulching kit, you can mulch your grass. Please refer to “Chapter 6: Optional Attachments” to learn more.
Figure 12a
Figure 12. The side discharge in place.
Figure 12b
Rear Bagger
The NEUTON Rear Bagger (MA 4.1) lets you catch your grass clippings as they are cut, eliminating the need to rake. The Rear Bagger easily attaches to the Support Rod (Figure 12a) on the back of your Mower (Figure 12c). Removal is just as easy so you can dump out your clippings .
Figure 12c. NEUTON Rear Bagger attached to the Mower
16 | NEUTON EM 5.1 Cordless Electric Mower Safety & Operating Instructions |
