New Holland
824 3PN 890W 27P 29P
MODEL | 824 | 3PN |
CORNHEADS |
|
|
Number of rows | 2 | 3 |
Row spacing, in. (mm) | 28 to 40 variable (711 to 1016) | 28 to 32 (711 to 813) |
Overall width, ft. in. (mm) | 5’ 4” to 6’ 6” variable (1626 to 1981) | 7’ 8” (2337) |
Length, ft. in. (mm) | 6’ 3” (1905) | 7’ 9” (2362) |
Height, in. (mm) | 53 (1346) | |
Weight, lbs. (kg) | 865 (392) | 2030 (921) |
Drive protection | Shearbolt | Slip clutch |
Type of sickle | ....................................................................Rotary | |
Stalk deflector | ..................................................................Standard | |
Power divider | Standard | Standard (L & R) |
Chain size | Ag Impl #620 | #60 Roller chain |
MODEL | 890W | 27P | 29P |
WINDROW PICKUPS |
|
|
|
Tine width, ft. in. (m) | 5’ 11” (1.79) | 6’ | 7’ 8” (2.34) |
Pickup width, ft. in. (m) | 7’ 0” (2.12) | 7’ 7” (2.15) | 8’ |
Total unit width, with skid shoes, ft. in. (m) | 7’ 4” (2.19) | — | — |
Total unit width, w/roller and gauge wheel, |
|
|
|
ft. in. (m) | 8’ 0” (2.45) | 8’ 10” (2.69) | 9’ |
Number of tines | 84 | 120 | 144 |
Pickup drive | .............................................................. | Chain/gear set | |
Auger outside diameter, in. (mm) | 18 (457) | ................................................................... | 20 (508) |
Auger drive | #50 roller chain | #60 Roller chain | #80 Roller chain |
Overload protection | ...........................................Slip clutch | ||
Windguard | Standard | ||
Weight (approx), lbs. (kg) | 692 (314) | 1050 (476) | 1200 (544) |
Optional equipment | Transport wheels | — | — |
OPTIONAL EQUIPMENT
•Metalert®III electronic metal detector (standard on FP240)
•CropPro™ crop processor (FP230/FP240)
•Spout extensions
•Hydraulic swing tongue
•Automatic wagon hitch
•Tandem axle (FP230/FP240)
•Recutter screens
•Four paddle blower kit
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating decals and never operate machinery
without all shields, protective devices and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.