New Holland FR
Forage Harvester Specifications
FR9040 | FR9050 | FR9060 | FR9080 | FR9090 |
|
|
|
| |
MODEL |
|
|
|
| FR9040 | FR9050 | FR9060 | FR9080 | FR9090 |
ENGINE |
|
|
|
|
|
|
|
|
|
Make |
|
|
|
| New Holland | New Holland | New Holland | Caterpillar | New Holland |
Displacement, cu. in. (L) |
|
|
| 628 (10.3) | 787 (12.9) | 787 (12.9) | 1098 (18) | 1220 (20) | |
Configuration |
|
|
| In line 6 | In line 6 | In line 6 | In line 6 | V 8 | |
ECE R120 power @ 1800 RPM, HP (kW) * |
| 424 (312) | 500 (368) | 576 (425) | 685 (504) | 824 (606) | |||
ECE R24 power @ 1800 RPM, HP (kW) ** |
| 403 (300) | 475 (354) | 548 (409) | 651 (485) | 782 (583) | |||
Fuel capacity, U.S. gal. (L) | ........................................................................ |
| ................................................. | 280 (1080) |
| ||||
Optional 85 gal. fuel tank |
|
| ........................................................ | Yes |
| ||||
FEEDING SYSTEM |
|
|
|
|
|
|
|
| |
Number of feedrolls |
|
| ........................................................ | 4 |
| ||||
Width of housing, in. (mm) |
| .................................................... | 33.5 (837) |
| |||||
Metal detector |
|
|
| Standard |
| ||||
Harvesting unit drive |
|
| ............................................................................... | Hydrostatic |
| ||||
No. of length of cut changes, in. (mm) |
| ............................................... | 25 - 1.3 |
| |||||
CUTTERHEAD |
|
|
|
|
|
|
|
| |
Type |
|
|
| ........................................... | Chevron 2x8 or 2x12 |
| |||
Width. in. (mm) |
|
|
|
| 34.5 (862) |
| |||
Cutterhead diameter, in. (mm) |
| .................................................. | 28 (700) |
| |||||
Speed, rpm |
|
|
| ......................................................... | 1132 |
| |||
KNIFE SHARPENING |
|
|
|
|
|
|
|
| |
Reverse rotation |
|
|
|
| Standard |
| |||
Automatic from cab |
|
|
|
| Standard |
| |||
KERNEL PROCESSOR |
|
|
|
|
|
|
|
| |
Optional |
|
|
| .......................................................... | Yes |
| |||
Roll diameter, in. (mm) |
|
| .................................................... | 10 (250) |
| ||||
Roll speed (upper), rpm |
|
| ..................................................... | 3527 |
| ||||
Roll speed (lower) belt drive, rpm |
|
|
| 3110 |
| ||||
Roll spacing, in. (mm) |
|
| ........................................... | 1/32 to 7/16 (1 to 10) |
| ||||
Gap adjustment |
|
|
|
|
| ||||
|
| ............................................................................. | Optional |
| |||||
ACCELERATOR |
|
|
|
|
|
|
|
| |
Two position |
|
|
| ............................................................... | Standard |
| |||
Diameter, in. (mm) |
|
|
|
| 20.5 (525) |
| |||
Width, in. (mm) |
|
| ................................................... | 30 (750) |
| ||||
Speed, rpm |
|
|
| ......................................................... | 2119 |
| |||
SPOUT |
|
|
|
|
|
|
|
|
|
Rotation, degrees |
|
| .......................................................... | 210 |
| ||||
Hydraulic height position |
|
| ........................................................ | Yes |
| ||||
|
|
|
| Yes |
| ||||
No. of wear liners |
|
|
|
| 2 |
| |||
ELECTRICAL SYSTEM |
|
|
|
|
|
|
|
| |
Type |
|
|
| ...................................... | 12 volt w/190 amp alternator |
| |||
Batteries |
|
|
| ............................................................ | 2 |
| |||
PROPELLING DRIVE |
|
|
|
| Hydrostatic |
| |||
TRANSMISSION |
|
| ...................................... | 4 speed w/ electric shift |
| ||||
MAXIMUM GROUND SPEED, MPH(KM/H) | ....................................................... | 23 (40) |
| ||||||
*R24 - engine tested with fan and alternator | **R120 - engine tested without the fan and alternator |
|
| ||||||
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating 
decals and never operate machinery
without all shields, protective devices and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1 of 1
