New Holland
Bale Wagon Specifications
H9870 H9880 1037
MODEL NUMBER | H9870 | H9880 | 1037 |
Operating speeds, mph (kph) |
|
|
|
Loading | 10 (16) | 10 (16) | NA |
Hauling (on approved grounds) | 30 (48) | 30 (48) | NA |
Hydraulic pumps | Piston pump | Piston pump | 10.5 gpm (39.7 Lpm) |
| 29 gpm (110 Lpm) | 29 gpm (110 Lpm) |
|
| @ 2450 rpm (2050 psi) | @ 2450 rpm (2050 psi) |
|
| Gear pump | Gear pump |
|
| 6.7 gpm (25 Lpm) | 6.7 gpm (25 Lpm) |
|
| @ 2450 rpm | @ 2450 rpm |
|
| Gear pump | Gear pump |
|
| 13.8 gpm (52 Lpm) | 13.8 gpm (52 Lpm) |
|
| @ 2450 rpm | @ 2450 rpm |
|
Hydraulic valves | Manual spool valve | ||
| Two manifold valve | Two manifold valve |
|
Bale length, in. (cm) | assemblies | assemblies |
|
|
|
| |
Minimum | 36 (91) | 44 (118) | 34 (86) |
Maximum | 41 (104) | 48 (122) | 42 (106) |
Stack size, in. (cm) |
|
|
|
16 x 18, height | 162 (411) | 162 (411) | 7 tiers |
16 x 18, width | 120 (305) | 92 (234) | 3 bales |
14 x 18, height | 162 (411) | NA | 7 tiers |
14 x 18, width | 114 (290) | NA | 3 bales |
16 x 23, height | NA | 151 (384) | NA |
16 x 23, width | NA | 92 (234) | NA |
15 x 22, height | NA | 157 (399) | NA |
15 x 22, width | NA | 92 (234) | NA |
Automatic tie tier | Standard | Standard | NA |
Max. hillside angle | NA | NA | 10° |
OPTIONS | ■ Heater | ■ Heater | ■ Hillside hauling kit |
| |||
| ■ Weight box | ■ Weight box | ■ |
| ■ Wiper kit | ■ Wiper kit | remote controls |
| ■ Radio | ■ Radio | ■ Tier counter |
| ■ Fan reverser | ■ Fan reverser |
|
| ■ First table flow control valve | ■ First table flow control valve |
|
| ■ Auxiliary mirror | ■ Auxiliary table flow control valve |
|
| ■ Rear worklight | ■ 16 x 18 bale kit |
|
| ■ Brake pedal kit | ■ Auxiliary mirror |
|
|
| ■ Rear worklight |
|
|
| ■ Brake pedal kit |
|
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating 
decals and never operate machinery
without all shields, protective devices and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 2 of 2
