1617 AUTO COMMAND™ TRANSMISSION
INNOVATIVE AUTO COMMAND™ TRANSMISSION OFFERS ADVANCED NEW HOLLAND FEATURES
Designed and built by New Holland, the T7 Auto Command is available from the T7.170 to the T7.270. This new generation of CVT transmissions benefits from multi direct drive points offering 100% mechanical efficiency, plus advanced double clutch control. It is the smoothest and most productive CVT available.
Speed diagram
|
| 3 |
|
| 2 |
| 1 |
|
|
| forward |
0 | 5 | 10 15 20 25 30 35 40 45 50 |
|
| kph |
A SPEED FOR EVERY NEED
Auto Command allows the operator to set a target speed of between 20m/hr right through to 50km/hr. No steps. No range changes. Just seamless speed to match your every need.
| UP TO 10% | ENGINE |
| |||
| SPEED | REDUCTION |
| |||
|
|
| FUEL |
| ||
| FOR | GREATER |
| |||
|
|
| ||||
| ECONOMY* |
| ||||
|
|
| ||||
| 1700 |
|
|
| 1700 | models |
(rpm) |
|
|
|
| ||
1600 |
| 1650 |
|
| ||
50 kph |
|
|
|
| - T.270 | |
1550 |
|
|
|
| ||
Engine speed at |
|
|
|
|
| |
1500 |
|
|
|
| * only T7.220 | |
1400 |
|
|
|
| ||
|
|
|
|
| ||
| 1300 |
|
|
|
|
|
New T7 Competitor A Competitor B
MAKING THE MOST OF AVAILABLE TORQUE
New Holland has developed its Auto Command™ transmissions so they can exploit the low running speed, high torque New Holland engines. With 50kph ECO, the engine can run at a fuel efficient 1550 rpm.
•Force based movement enables the operator to change speed and direction. On the ICP there is a switch to alter the response of the speed change.
•Target speed adjustment – set a target speed to match your exact needs. Perfect when moving between fields or when crop yields have altered.
•Target speed selection – allows you
to change between three target speeds
•4 DRIVING MODES TO SUIT YOUR DRIVING STYLE
-Auto Mode. Select the desired target speed and Auto Command will match the engine and transmission to maintain it.
-Cruise Mode. Once a desired operating
speed has been achieved, Cruise Mode allows the operator to set the transmission to
maintain the speed for economy and productivity. - Manual Mode. Allows the operator to set
the required engine and forward speed.
-PTO mode. As soon as the PTO is engaged, Auto Command will operate to guarantee
a constant engine speed.