New Holland
TD Tractor Specifications
TD80D TD5050 TD5050 High-Clearance
MODEL | TD5050 |
ENGINE† |
|
Type | |
Number of cylinders | 4 |
Displacement, cu. in. (L) | 274 (4.5) |
Gross engine horsepower, hp (kW) | 90 (67) |
PTO horsepower, hp (kW) | 80 (59.7) |
Rated speed, RPM | 2500 |
Maximum torque | 346 |
Torque rise, % | 44 |
Fuel type | 100% Biodiesel approved (meeting ASTM |
| 6751 standards, see your New Holland dealer |
| for guidelines) and/or standard diesel fuels |
Air filter | Dual element, dry type with cleanable outer |
| element and replaceable inner safety element |
Lubrication | Full flow, pressure lubrication with |
| vertical mount |
Oil & filter change interval, hours | 300 |
Starting aid | Thermostart |
Throttle | Hand and/or foot controlled |
Exhaust | Under hood muffler w/ vertical exhaust pipe, |
| optional |
Emissionization standard | US EPA Tier III |
Fuel tank capacity, gallons (L) | 31 (118) |
TRANSMISSION |
|
Standard transmission | 20Fx12R creeperwith synchronizedmechanical |
| shuttle (4 synchronized gears and 3 ranges, |
| creeper operates in lower 2 ranges) |
Traction clutch | Dry 12 inch diameter heavy duty cerametallic plate |
Ground speed*, mph | Forward: |
| Reverse: |
| Two creeper ranges provide minimum |
| groundspeed of 13.1 ft./min. (400 cm/min.) |
| at 2,500 egine RPM |
Rear differential lock | Mechanical foot pedal engagement |
Service brakes | Individual hydraulic wet disc, |
| and equalizing |
Parking brake | |
HYDRAULICS |
|
System type | Open center, fixed displacement gear pump |
System pressure, psi | 2,755 |
Implement pump capacity, |
|
gpm (L/min) | 16.1 (61) |
Steering & services system | Hydrostatic power steering w/dedicated gear |
Total maximum tractor flow, | pump - 7 gpm (26.5 L/min) |
| |
gpm (L/min) | 23.1 (87.5) |
Remote valves - standard | 1 open center, rear mounted, color coded lever |
MODEL
3-POINT HITCH REAR Category
Position control / draft sensing
Lower link ends Stabilizers
ASAE lift capacity @ 24 in.,lbs. (kg) Fast raise / lower control
Upper limit regulation
PTO
REAR
Clutch type
Clutch diameter, in. (mm)
Engagement
Speed
ELECTRICAL Alternator Battery capacity (cold cranking amps) Lighting
Accessory power outlets
Fuses
APPROXIMATE SHIPPING WEIGHT ROPS - 2WD / FWD, lbs. (kg)
APPROXIMATE DIMENSIONS Height to top of ROPS, in. (mm)
WHEELBASE 2WD, in. (mm) FWD, in. (mm) 2WD, in. (mm) FWD, in. (mm)
TRACK WIDTH
Rear without spacers, in. (mm) Rear with spacers, in. (mm) Front 2WD, in. (mm)
Front 4WD, in. (mm)
TD5050
Standard
II
Two levers w/ ability to blend draft and position control / mechanical, lower link sensing w/ hydraulic position control
Flexible Telescopic
5,025 (2279)
Standard
Standard equipment, adjustable mechanical stop limit on hitch upper lift arm
Standard, w/
12 (305)
Single lever, mechanical engagement 540 RPM (540/1000 optional)
12 volt, 120 amp
800
2 hi/lo beam headlights, 1 rear worklight, brake lights, flashing safety lights/turn signals Standard equipment,
7,888 / 8,818 (3578 / 4000)
115.7 (2940)*
89.7(2278) – narrow axle
87.5(2222) – narrow axle
85.3(2168) – wide axle
83.1(2112) – wide axle
Minimum | Maximum |
59.2 (1504) | 79.6 (2021) |
72.2 (1834) | 83.8 (2130) |
61.6 (1566) | 77.4 (1966) |
61.7 (1569) | 81.9 (2082) |
| controls with quick coupler dust covers |
Remote valves - optional | Up to 3 open center, rear mounted, color coded |
| lever controls with quick coupler dust covers |
†Manufacturer's estimate *measured with 320/80R42 tires
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating decals and never operate machinery
without all shields, protective devices and structures in place.
© 2009 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 3of 3