NewAir 9700i, 9715i, 9701i, 9720i user manual More Detailed Information on the USER SETTINGS

18

More Detailed Information on the USER SETTINGS.

SENSOR SETTINGS

USE LOCAL SENSOR

AVG. LOCAL / REMOTE

USE REMOTE SENSOR

USER MENU SELECT

SECURITY

CHANGE TEMP. ONLY PREVENT ALL CHANGES

USER MENU SELECT

ENTER SECURITY CODE

FOR TEMPERATURE

	0	0	0	0
USER MENU				SELECT

SENSOR SETTINGS

This screen will appear when a remote indoor sensor (9020i) is connected to the thermostat. USE LOCAL SENSOR will disable the remote sensor and only sense from the thermostat. AVG. LOCAL/REMOTE will take a temperature reading from both the thermostat and the remote sensor and average the two for even temperature control. USE REMOTE SENSOR will disable the sensor in the thermostat and only control from the remote location.

SECURITY SETTINGS

In order to prevent tampering with the program and your desired settings, two levels of security are available.The first will allow only temporary changes to the temperature. It protects all other programmed setpoints. The second will restrict changes to EVERYTHING, including temporary changes to the temperature.

SECURITY CODE

In this screen you enter a four-digit code. Use the UP or DOWN button to change the first value, press SELECT. The second digit will be highlighted. Repeat for all four values. And don’t forget your code. If you do, you will have to reset the entire thermostat and that will erase all the schedules you’ve programmed into the unit.

When would I need to change the USER settings?

About the only features you may need to change are the FILTER INTERVAL (in case you get a new type of high efficiency filter), the temperature differentials (if you desire additional comfort), and the security settings. All the other settings probably will not need to be changed.