For Continuous Drainage:
•Remove the drain knob and rubber
plug from the drain hole and retain it for future use.
• Connect the included drain tube to the drain hole.
• Connect the other end of the tube to a drain (see Fig. 18).
•The drain tube may be extended by
adding an extension tube with a suitable connector.
Please Note:
1.The drain must be at or below the
level of the drainage port.
2. The full water tank indicator will not work when the unit is being continuously drained.
3. To extend the drain tube, you can connect it with another hose with an overall diameter of approximately 0.7” (18 mm).
11
FIG.17
FIG.18
FIG.19
(OD:18MM)