NewAir ADW-2600W Starting a Wash Cycle, Wash Cycle Table, Turning on the Appliance

5. Starting a Wash Cycle

Wash Cycle Table

Note:

•Indicates that you will need to fill rinse aid dispenser

•*AHAM DW-1-2005: This program is the test cycle; the recommended rinse aid dispenser setting is 6.

Program	Cycle	Description of Cycle	Deterge	Run	Energy	Water	Rinse
	Selection		nt	Time	(Kwh)	(Liters)	Aid
	Information		Pre/Mai	(Minutes)
Heavy	For extremely	Pre-wash	n
	soiled loads	Pre-wash122º F(50º C)
	including	Pre-Wash 122º F (50º C)
	pots, pans	Wash140º F (60º C)	3/15g	110	0.499	15.9
	and dishes
		Wash 122º F (50º C)
	with food that
		Rinse
	has dried and
		Rinse 149º F (65º C)
	hardened.
		Drying
Normal	For normally	Pre-wash
*(AHAM)	soiled loads	Pre-wash
	including	Pre-wash
	plates,	Wash 131º F (55º C)	3/15g	85	0.344	13.6
	glassware and
		Rinse
	lightly soiled
		Rinse149º F (65º C)
	pans.
		Drying
Light	For lightly	Pre-wash
	soiled loads,	Pre-Wash122º F (50º C)
	including	Wash122º F (50º C)	3/15g	75	0.317	11.5
	plates,	Rinse
	glassware and
		Rinse 140º F (60º C)
	bowls.
		Drying
Speed	For quickly	Pre-Wash
	washing lightly	Pre-Wash122º F (50º C)
	soiled loads	Wash122º F (50º C)	15g	45	0.236	11.5
	that do not	Rinse
	require drying.
		Rinse131º F (55º C)
Soak	For rinsing	Pre-wash
	dishes you		N/A	10	0.01	2.5
	plan to wash at
	a later time.

Turning on the Appliance

To start a wash cycle:

Pull out the dishwasher basket. See section “Loading the Dishwasher Basket.” Pour in dishwashing detergent. See section “Using Detergent.”

Insert the plug into appropriate outlet. Remember: the power supply is 120V/60 Hz. Make sure that the water supply is turned to full pressure.

Select appropriate wash program.

Heavy Normal Light Speed Soak

Press the Start/Reset button. The dishwasher will start.

Note:

If you press the Start/Reset button while the dishwasher is running, the selected program light will stop blinking and the dishwasher will beep every minute until Start/Reset is pressed again.

9