Reflector Burner assembly
Base assembly with the
allast weight & Bracket uel
Cylinderdecorative cover Post / the Slip socket cover Regulator / hose assembly Fastener package Owner’s manual
Wheel Kit (optional part)
(Figure 1)
1.4LP gas hook up and installation of the cylinder 1.4.1 Gas requirements:
Our heater is designed to use LP gas only, never substitute gases.
he heater comes with a regulator/hose assembly for hook up to a standard 20pound (5 gallon) LP Overfill Protection Device and Type 1 fitting equipped gas cylinder. The LP cylinder is not included. You need to purchase a filled LP Cylinder that must be constructed and marked in accordance with specifications of the U.S. Department of Transportation. Do not use dented or rusty LP cylinder by your LP supplier.
Never use an LP cylinder with a damaged valve. Do not modify the Regulator / hose assembly.
1.4.2 LP gas hook up (see Figure 2)
The heater is designed to house a 20 pound gas |
|
cylinder on the base assembly. |
|
Lift the cylinder decorative cover and |
|
rest it on the triangular Socket. |
|
Place the LP cylinder into the housing |
|
on the Base, then attach the Regulator |
|
/ hose assembly to the LP cylinder |
|
valve. The regulator and the Cylinder |
|
have |
|
tighten). |
|
Be sure this connection is tight but do |
|
not over tighten on the LP cylinder valve. | (Figure 2) |
6
