Newcon Optik DN140M operation manual Components, Operation Instructions, Name, Quantity

6. OPERATION INSTRUCTIONS

WARNING!

NEVER DIRECT THE LENS IN THE DIRECTION OF BRIGHT LIGHT!

6.1Starting procedures.

1.Unpack the device. In order to install the batteries, open battery house cover (4), and install the batteries.

Check the functioning of the device by switching it on (click switch 10) and looking through eyepiece (2). If power supply and the batteries are functional, you will see a greenish-lit screen. If the screen is not lit, check the batteries. Replace the batteries if necessary. Once everything works, take the time to fill in your warranty card.

Note: The scope will remain On for up to several minutes after the unit is shut Off. This is normal.

6.2 Testing operation,

Direct the device on an object placed within 10-20 m from the viewer. Turning the focus ring (7), eyepiece (2) try to achieve the sharpest image on the screen of the image tube.

10

3. COMPONENTS

DN-140M is supplied with the following components:

NAME	QUANTITY
DN-140M unit	1
Case	1
Lens cap	1
I/R illuminator	1
Weaver weapon mount (or European)	1
Rubber eye guard	1
Warranty Card	1
User’s Manual	1
OPTIONAL ACCESSORIES
Camera adapter ring	1
Video adapter ring	1

7