OFF LAM is off
RVisible aimer is on
PIR aimer is on
IL | Illuminator is on |
ILP | Both IR aimer and Illuminator are |
| on |
BT | Battery test |
The LED (14, Fig. 2) in BT mode indicates battery level: solid red LED means the battery charge is normal, if it is blinking - the battery must be replaced.
IR channels of LAM can operate at high (H mode) and low (L mode) power levels of laser. Low mode or IR channels are used for training purposes. Appropriate level can be chosen with switch (15, Fig. 2). Red channel is switched into the training mode by means of removable filter.
To prevent unintentional switching to high power mode, switch (15, Fig. 2) is blocked with the ring (12, Fig. 2). To unblock the switch and allow high power mode (H) the ring must be pulled out and turned.
6
