4.Set the minimal divergence of the illuminator channel.
5.Superpose centers of the spots produced by the aimer and illuminator on the aiming mark by rotating adjustment knobs (1, Fig. 1), (17, Fig. 2).
6.Fire the weapon.
7.If point of impact is off the aiming mark adjust windage and elevation by rotating adjustment knobs (1, Fig. 1), (2, Fig. 1), (17, Fig. 2). (Each click of adjustment mechanisms shifts radiation spot by 5 cm on the target at 100 m.)
8.Repeat steps 7 and 8 until point of impact coincides with the aiming mark.
When adjusted unit is remounted on the same Picatinny rail of the same weapon no
Aiming
When firing at a distance of up to 200 m the radiation spot is to be aimed at the target.
When firing at a longer distance elevation adjustment may be required.
14
