Newcon Optik LAM 3 IR operation manual Long-term storage, To remove old layer of lubricant

If LAM was exposed to salt water it should be rinsed in fresh water and dried outside at no more than 55oC.

Long-term storage

When preparing for long-term storage, cover the external metal surfaces of LAM with protective lubricant. Each 4 (four) years old layer of lubricant should be removed and new layer be applied.

To remove old layer of lubricant:

-Wipe LAM with clean dry cloth,

-Degrease metal surfaces of LAM with benzene moistened cloth,

-Dry LAM out-of-doors.

Do not touch unit’s metal surfaces with fingers after

cleaning.

To apply new layer of lubricant:

-Within two hours from the cleaning apply an even 0.2-0.5 mm thick layer of lubricant on metal surfaces with a brush.

-Do not cover plastic parts.

17